Remixed CBC Box for Arduino
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A CBC box that can allocate an Arduino inside and has space for a fan.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Share Alike
This was a project for DI3D curricular unit at ISEL. I took an inspiration from the author “ggoss” which was also the base the professor suggested for the project, hence, this remix.
I applied some changes to it and created different ways for cable management and even tried to make different air paths for the box.
This was a first version and has, therefore, some space for improvement, such as the screws for the fan, the two bottom ones are touching the arduino before they are screwed completely. Also for the five circle in the back wall, the two lower circles could be changed in positions to be a bit higher so that cables would be stressed when passing through them to be out of the box.