Commodore 1084S power switch support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a video showing how I fit it into the CRT.https://youtu.be/L-KKqqoF-10 I had a 1084s monitor with a faulty…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 79
- Wydruki
- 2
- Wyświetlenia
- 673
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
I made a video showing how I fit it into the CRT.
I had a 1084s monitor with a faulty switch and it was hard to find an original. While searching for alternatives I found the Canal PDS-1 and if it was flipped onto it's back the connections can be soldered to the board. I designed this mount for the switch to sit on and the mount can be screwed to the PCB with some of the holes from the original switch.
I printed in PETG for strength with 5 perimeters 5 top and bottom layers and 30% infill.
Print Settings
Printer Brand:
Creality
Printer:
CR-20
No
Supports:
No
200
Infill:
30
Filament:
esun PETG black
Category: Video Games