1 / 3
Kreg Accu-Cut tracksaw adapter for DeWalt DCS565 — zdjęcie 1
1 / 3

Kreg Accu-Cut tracksaw adapter for DeWalt DCS565

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Guide adapter for using the DeWalt DCS565 with the Kreg KMA2700 Accu-Cut track system

Ocena
5 / 5
Polubienia
28
Pobrania
183
Wydruki
2
Wyświetlenia
1581
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The Kreg Accu-Cut comes with a saw sled that does not grip the DeWalt DCS565 tight enough.

With this print, the it's no longer wobbeling. 
Designed to align perfectly on the blue guide strip of the Accu-Cut (as the manual suggest, the guide strip should be shaved during 1st run - with this, no need to re-align everytime mounting back to the sled)

I've printed this in PLA with 15% infill.

print 3xBottom Dowel + 2xTop Dowel.

Use M4 nuts and bolts.

 

Pro tip - use PTFE adhesive tape in the grooves to reduce friction https://www.aliexpress.com/item/1005007065274166.html (15mm)