1 / 3
Voron 0.2 Top Hat Display Mount and 1515 cable clip — zdjęcie 1
1 / 3

Voron 0.2 Top Hat Display Mount and 1515 cable clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Top mount solution for Voron 0.2 builds to allow easier access to the display.

Ocena
0 / 5
Polubienia
3
Pobrania
24
Wydruki
0
Wyświetlenia
175
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I created these brackets to mount the Voron 0 display on the top hat of the 0.2 varian to make access easier than when it's mounted on the bottom. You can use the Voron display plate and the M2 self tapping screws that are needed for the cover mount. 

The mounts can be printed without support and the orientation of the STLs should be correct.. I you haven't added preloaded nuts in the 1515 frame, you can easily add them without deconstructing the whole frame. 

I also added some 1515 cable clips to hold down the USB cable. I added my design to the models but you can use other variants as well. I would add a brim for the 1515 clips.

BOM:

4X M3X6/M3X8 BHSC
4X M3 nuts

Print settings:

Material: PETG/PLA+/ABS
Layer Height: 0.2mm
Walls: 5
Infill: Grid, 35%

Tagi