Portable / Collapsible Laptop Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A laptop stand with an optional strut to connect / stiffen the sides
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 476
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a model I created in fusion and played with the angles to find a set that worked for me. The struts are hex shaped to stiffen the structure. Optionally you can attach the struts more permanently with M4 but they already have 12mm of engagement which is usually sufficient.
There are two sizes here a smaller (lower) version and taller version. This should fit most 12-15" laptops. The raised front is to allow devices (like surface laptop studio) that contain a recessed bottom to fit correctly.
I printed in PLA, 0.2mm layer height, 15% grid infill and it is very stiff.