Jet 1015 lathe tool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attaches to the end of the Jet 1015 lathe to hold large and small tools while turning.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 488
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Standard Digital File License
Attaches to the end of the Jet 1015 lathe to hold three large tools and six small tools while turning. Small shelf for items. Optional tab off the end to hold live centers and chucks with No. 2 Morse Tapers.
I suggest printing with the large flat surface down and using some type of tree support. I would also suggest using higher than usual infill (50-70% depending on type) as this part needs to be strong.
You'll need an extended reach socket driver to install the bolts with a ½ socket.
The tail stock is still removable as long as you take the tools out first.
Version 1 has an extra tab for live centers and chucks.
Version 2 does not.
If you'd like this part printed and shipped to you, you can purchase it here!