Phone Platform for a MiniOne PhotoHood
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created this as an alternative to the official minione phone platform for the photohood
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a model of my own making to satisfy a need for cheaper than I could buy it from the company that makes the official item. This is to fit on a minione photohood (goes with their centrifuge and other items) so that a phone can rest with camera aperture over the device for viewing/photo/video capture.
This is the link to the photohood: MiniOne Photo Hood (M2005) • MiniOne Systems
You can totally buy the official product here: Set of 5 – MiniOne Photohood Phone Platforms (M2017) • MiniOne Systems
If you can fund the purchase of the official product, I say go for it. If you can't but have a printer, this came out really well and is effective for the cost.
Printed on Bambu x1c, .6mm nozzle, .36mm layer height, 15% infill.
Shown is my prototype printed in PLA, I plan to print enough for my wife's classroom in ABS just to make sure the tabs are a bit stronger.