R2D2 Baddeley Slimmed Holoprojector frame B
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement servo mounting backing plate for the holoprojectors in Mr. Baddeley's 3D printable R2D2 mk2 design.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
The original servo-mounting backing plate for Mr. Baddeley's mk2 R2D2 design takes up too much space with moving panels and Max Stang PSI Pros. I moved the servo mounting blocks and stripped some material from the sides to make it take up less space and fit between the other components. Some of the modifications, specifically the extra material removal, were inspired by a modification that was posted on his Facebook group.
After replicating the material removal, I noticed that the servo mounting brackets were still too large and interfering with the panel hinges and the PSI mounts. After some measuring, I decided that I could probably shift the mounting brackets inward some distance to both attempt to line up the servo horns better with the shaft coming out of the back of the holoprojector, and to take up less room while doing so.