1 / 2
Friction Fit Pi Camera Ribbon Clip for Armor Cases (Geeekpi & Geekworm) — zdjęcie 1
1 / 2

Friction Fit Pi Camera Ribbon Clip for Armor Cases (Geeekpi & Geekworm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Route your pi camera ribbon cable semi-neatly.

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
82
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I'm ocd, wanted this cable to lay neatly without crimping it and possibly damaging it.

The geeekpi & geekworm fin dimensions differ.

I found the fin distances to be pretty inconsistent, even on the same case, so..

I included both versions as well as the 3mf so you can adjust the friction fit part if it's too tight or loose on your case.