1 / 1
Loctite SEMPAK cartridge plunger for 3M DMA 50 dispenser — zdjęcie 1

Loctite SEMPAK cartridge plunger for 3M DMA 50 dispenser

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dispense Loctite 50mL SEMPAK adhesive with a 3M Duo-Pak dispenser.

Ocena
0 / 5
Polubienia
3
Pobrania
94
Wydruki
0
Wyświetlenia
518
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a plunger for the 3M DMA 50 dispenser. 

This dispenser is made for the 3M 2 part adhesive Duo-Pak cartridge.

With this plunger, the 3M dispenser can dispense Loctite 50mL (50g:9g) SEMPAK cartridges.

I printed in PETG, 0.4mm nozzle, 0.2mm layer height, and it seems to work well.

I did print in a harder filament but it was weak across the finger pull slot.

Tagi