Novolizer inhaler carrying case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple two part carrying case for Novolizer inhaler
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A two part carrying case designed to be able to carry the Novolizer style inhaler without the button constantly being inadvertently actuated.
Created with the help of a 3D-scan of the inhaler to enable a good fit in the case.
Printed on a P1S with a 0.4mm nozzle and .12mm layer height, have been using it for several months with no issues.
No supports neccesary, print one left part and one right part with the flat side against the print bed.
If the fit between the two parts is bad for you, give me a message and I'll see if i can upload an adjusted model.