Raspberry Pi Camera v2 Upright Mount with Cable Routing for Bambu X1/P1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds the Pi cam in an upright orientation with routing guides to keep the cable away from moving parts.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 245
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I remixed Holger's raspberry pi cam mount so the camera would be situated right side up which eliminates the need to flip the image in software to see the feed in the correct orientation. Since I needed to have the cable coming into the bottom of the camera anyway, I adapted the elevated mount from Thomas van der Horst's remix, although mine isn't quite as tall.
My main addition is a cable retainer that mounts on the back rail of the printer which keeps the ribbon cable held in place between the rear belts and the hot end housing while also guiding it around the PTFE tube.
Printing
These are the settings I used:
- 0.16 layer height
- Supports on for the Upper Camera Mount
- Supports and Mouse Ears on for the Cable Retainer
- PETG filament
Assembly
Line up the two pins on the Upper Camera Mount with the two holes in the Lower Camera Mount and push them together. if the fit is too tight, there may be some support material on the pins that needs to be removed.
Attach the cable to the Pi cam, thread the cable through the channel opening on the side of the mount and fix the camera to the mounting posts. Attach the Camera Cover and thread the ribbon cable through the channel guide on top of the cover.
Attach the Cable Retainer to the rail at the rear of the P1S with the cable guide opening facing the poop shoot and loop the cable through the guide.
