Vader 3 Pro: Faceplate with Back cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Faceplate designed to connect with the back cover.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Huge thanks to mushiwushi for the original work! I remixed it to allow the faceplate and back cover to be set together.
The original could be printed without support, but this version will likely require support material for successful printing. In my PLA printing setup, printing in the orientation shown in the screenshot with support worked well.
To remove the stock faceplate, you'll need to disassemble the controller and remove the screws from the inside. I couldn't find a tutorial specifically for replacing the faceplate, but YouTube videos on replacing buttons can be helpful for this process.