Cybertruck Wheel Cover w/ Plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cybertruck wheel cover with a removable plug for easy non-damaging removal.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is designed to reduce potential scratching and paint removal from the cybertruck wheel cover. By using the plug, one is able to pull the cover off using a hook and pick set (which can be used to remove both the plug and the cover).
After discussion with a fellow Cybertruck owner and ex-tech, he noticed some scratches occuring on the wheel paint after removing factory covers. By using a plug and pull method this minimizes the risk of accidental scratches to the exterior of the wheel.
The plug is slightly slimmer than the hole offset to account for droop when printing the cover face down and to provide a flush cover. I recommend to use supports everywhere to support plug slot and the inner wheel catch. Will provide the raw plug file later to allow for height adjustment.
Currently running ~2000 miles over gravel, potholes, and speed bumps without any slippage of the plug or wheel cover.
Print Settings
Rafts: Brim enabled (may depend on your setup for warping)
Supports: Everywhere
Resolution: 0.2mm
Infill: 15%
Filament Used: Prusament PETG
Printer: Prusa MK4S