Christmas Tree 2024
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
6 new Christmas Tree designs printed in vase mode to put a battery tea light inside.
- Ocena
- 5 / 5
- Polubienia
- 146
- Pobrania
- 481
- Wydruki
- 3
- Wyświetlenia
- 1753
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Here are 6 new Christmas Tree designs to fit over a battery operated tealight, do not use a flame tea light, or used plain just for decoration. They are similar to the 2023 designs but different in twists and curves.
The stl file is solid to be printed in vase mode to make the tree hollow. Use 0 bottom layers. The trees can be printed in normal mode using 0 bottom layers and 0 top layers and 1 wall. The use of a brim will be helpful to get the tree to stick to the print bed. Trees are 94mm to 120mm wide, depends on the model, and 120 tall and can be scaled to meet your need. I used a .8 wall line width and the tea light wouldn't show through. I did not try a .4 wall line width as there are some horizontal layers that are very flat. I used a .6 wall line width and the light would shine through.