Philips Senseo EcoPad Holder and Tamper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder and Tamper for the EcoPad refillable pods for the Philips Senseo Coffee Machine
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 1
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I have a Philips Senseo Coffee Machine and the Pods are expensive so I got a EcoPad so I can use my own ground coffee. The EcoPad has a spike on the bottom and its difficult to keep it flat and still so I designed this holder and Tamper to fill the EcoPad Quickly and Easily.
Printed In Bambu Lab Basic PLA in white on the x1c. Took about an hour.
Print Settings
Layer height 0.2mm.
Infill 10% gyroid.
5 Bottom layers just for a bit more strength.
Use a brim if you have bed adhesion issues but you shouldn't need it.
Uploaded Step files if anyone wants to make alterations.
If anyone has any suggestions for improvements then feel free to let me know in the comments.