Peg Board Bracket for Generic Spray Bottle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket for generic spray bottle. Suitable for US standard peg boards from big box store.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I didn't find a good and tight mounting system for US standard peg board so I made one.
Description:
This would fit US standard peg boards with ¼ to 9/32 inch hole and 1 inch hole spacing from center of hole. The bracket has some tolerances built in so plus or minus 1/64 inch or 0.5mm is fine.
This model is designed specifically for a generic spray bottle. This seams pretty common in US. It may fits many more spray bottles.
How to print:
- This model contains multiple parts, you will need to import the 3mf file to your favorite slicer as A SINGLE PART.
- This model contains built in support. Please DISABLE SUPPORT before generating gcode. Remove the removable support before inserting the bracket into the peg board.
- The tiny fins on the mounting mechanism may break. This is totally normal. This part is a sacrificial part for tolerances. However, if your bracket become excessively loose, please stop using it.
- Print tested working using ABS and PETG. Please do not print this with PLA as the mounting system will be extremely brittle and easy to break.
Print setting I used:
| Layer Height | 0.2mm |
| Brim | Mouse Ear or no brim |
| Support | None |
| Material | PETG/ABS |
| Infill | Gyroid |
| Wall Order | Inside/Outside or Inside/Outside/Inside |
License:
Creative Commons (4.0 International License)
Attribution-NonCommercial
Absolutely no commercial use unless specifically authorized by the creator.
Message me for commercial license details.