Mycology Uncle Ben's rice bag holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
20,29 € – 24,80 € netto (bez VAT)
Dla pliku: rice bag rack holder mycology v56_0.4n_0.3mm_PLA_MK4S_11h51m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 22,54 € netto (środek widełek).
- Masa podana przez autora
- 505 g
- Czas druku podany przez autora
- 11,86 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Uncle Ben's rice bag holder for keeping inoculated rice bags organized in an incubator.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 542
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed for use with the introductory mushroom cultivation method commonly known as “Uncle Ben's technique" (UB Tek) for spawning mushroom mycelium to grain in “ready rice” bags. This print holds 6 ready rice bags. It makes it easy to keep an incubation box organized, and easily check colonization progress without tussling the bags.
Designed to be printed in place with a functional handle. No supports required. The handle can be flipped to allow for easy stacking. Two of the corners are rounded to make for easier storage in a cooler. Print orientation is important, please print with the handle touching the build plate, as seen in the gcode file.
Be sure to spray down with 70% isopropyl alcohol before use. There is a small lip on the bottom of each shelf to keep the bags in place. The bags are positioned so that the corners with injection ports or cuts are less likely to touch the holder. The bags can get twisty, so try to straighten them out before putting them in the holder. I prefer the hole punch with synthetic filter disc stickers instead of cutting the corners and applying micropore tape. YMMV.
I like adding strain and date on the bottom lip so i can see all the info without taking the bags out.
Please post any makes!
UPDATE:
This model doesn't work very well if your cutting the corner off and sealing with micropore tape. The topology of the carrier was optimized for cramming bags into a small space. Unfortunately, this topology will push the corner of the UB bags closed, greatly reducing fresh air exchange from corner cuts. This may cause your UB bags to colonize much slower than they would if the corners cuts were left with a gap. The last image shows the corner squeeze. I recommend the hole punch method with micropore tape or micropore stickers instead of corner cuts.
Support me
If you enjoy what I'm creating, please consider buying me a coffee. Your support goes a long way! Buy Me a Coffee?