Desktop Cornhole (print in place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scale models of a regulation cornhole board. 1:6, 1:8, and 1:12 scale sizes. Print in place.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed two of the 1:12 size, which makes it just a little too small for Skittles and M&Ms. One in PETG and one in PLA. The PETG supports removed a little less clean, other than that, supports off, then snap the legs down and up and it's ready to go!
I used default tree supports, which made for just 3 tiny pillars under the leg hinges.
Colorwise, my 1:12 prototypes could have been better with a cleaner plate and flushing volumes honed. But good enough for now :).
It's a merged STL, but there are 4 chevron stripes to make bucket painting easier if you want to go for multi-color printing.
If you really need a version with a different leg hinge let me know :).