MK4/MK4S 10mm Y-axis belt upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wider belt provides longer service life for your printer, if you often print with high acceleration, this will help.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 1010
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
⚪Read first! You need to buy some parts yourself.
⚪ What you need to prepare:
10mm Timing pulley T16-2GT (d=5mm) — 1 pcs
10mm idler pulley T20-2GT (d=5mm) — 1 pcs, either smooth or toothed is OK.
10mm 2GT timing belt — same length to existed y-belt
Φ5 × 25mm Rod — 1 pcs
5×7×0.2 Gasket — 2 pcs
⚪ How to use these parts:
【1】Cut the 10mm 2GT belt to same length to existed Y-axis one.
【2】Print all step parts provided.
【3】Assemble them as you assemble former parts which Josef provided. (Remember to put two gaskets on both sides of the idler pulley.)
⚪Printing tips:
All parts printable, only the idler holder need to draw some support.
Suggest using at least PETG, or other High temperature tolerance filaments, with 100% infill.
⚪Others:
Apply one zip-tie to Y-motor holder, it helps to stable the motor once you over-tighted Y-axis belt.