Fresh Air Mask Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This device is used for moving fresh air to the inside of a face mask to prevent moisture
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 563
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This device is used for moving fresh air to the inside of a face mask to prevent moisture from forming on glasses, and the inside of the mask. by moving outside air through a HEPA filter and into the mask
This is my first creation on Fusion 360 not all the dimensions are correct I am working on a v2 coming soon
the fan i used is a Noctua NF-A4 40mm x 10 5v the same one as on the Prusa i3. a 40mm x 20mm may work better but any 40mm 5v fan will work
the battery bank powers the fan i am not sure about the battery life i lasted more than a day for me
it was printed on the Crality CR10-Smart with Overture PLA
any questions leave in the comments