1 / 1
Skadis T-Nut mount for Asus ZenWiFi AX — zdjęcie 1

Skadis T-Nut mount for Asus ZenWiFi AX

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount the Asus ZenWifi AX to a Skadis board, or directly to a wall.

Ocena
0 / 5
Polubienia
2
Pobrania
27
Wydruki
0
Wyświetlenia
300
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
GNU General Public License v2.0

This is a mount for holding an Asus ZenWifi AX on the IKEA Skadis board.

It uses the Skadis T-Nuts mounting system from 6d6178.  You will need two nuts and the M2.5 hardware to attach them.  I use M2.5x16 screws.

There are also countersunk holes for mounting directly to a wall.

It uses quite a lot of supports, but if you don't need the cable guide you can cut it off in the slicer.

 

 

Tagi