1 / 4
ALUTEC Wheel Center Rim Hub Cap 64mm | Blank and Mercedes — zdjęcie 1
1 / 4

ALUTEC Wheel Center Rim Hub Cap 64mm | Blank and Mercedes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Customizable center cap for Alutec Wheels

Ocena
0 / 5
Polubienia
28
Pobrania
325
Wydruki
0
Wyświetlenia
1171
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Center cap for ALUTEC wheels.

The originals are 63.8mm. This version is 64mm for a tighter fit.

Choose from blank version to be customized or a provided Mercedes star

Fit very tight but are easily removable due to small recess to enter with removal tool

Non-glue, one piece fully blank version is provided and can be used for customized emboss engravings facing the print bed.

Logos like the mercedes star and custom versions with added height and Debosses need to be glued due to separated logo plate for support less print.

NOTE on glue
If you use CA glue (superglue) or any other glue that releases gases, mind to face the visible outside of the print down while drying. This will prevent evaporating gases from changing the color of the visible outside and only whiten the inside of the cap.
The effect can be seen in the 4th picture. If the cap had dried with the logo facing up, the logo would have turned spotted white.

Tagi