Single Dose Anti-Popcorning Breville Smart Grinder Pro Hopper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My own take on a SGP hopper for single dosing up to larger amount for drip coffee.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 430
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
A replacement hopper for the Smart Grinder Pro, I was unhappy with how small the opening and volume of the hopper was and I am not a fan of weights to prevent popcorning. It is sized to fit this bellows at 100% size https://www.printables.com/model/566384-breville-barista-express-single-dose-hopper-bellow/comments . I printed it at 0.2mm layer heights with a 0.6mm nozzle in ASA with 2 walls and 15% infill and its more than strong enough.
Installing, place the ring in 1st with the larger nipple to the rear, then press down the front.
Insert the outer sleeve and rotate clockwise.
Screw Hopper Sleeve on, righty tighty.
To remove, loosen the hopper sleeve and pull everything out, then use a screw driver of knife to pop the front section out of the hole in the grinder. You'll need to do this occasionally because to get the burrs out for cleaning and the bellows will push a small amount of grinds to behind the outer sleeve.
The lock ring design is similar to https://www.printables.com/model/309061-sage-breville-the-smart-grinder-pro-single-dose-ho but easier to install with the chamfer, any my lockring can even be used with this design, however if you're upgrading from that design you'll need to print a new lockring.