XL Enclosure finishers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
XL Enclosure finishers
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 36
- Wydruki
- 1
- Wyświetlenia
- 413
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
A couple quality of life improvements for the XL enclosure.
Magnet cover - covers the upper magnet for the bellows, so it no longer sticks to the bellows when lowering.
Bellows handle magnet holder - adds a magnet to the top bellows handle to grab it more securely. Modified the original XL panel clip for this. My enclosure kit came with 2 spare magnets, 2 spare M3x10rT, and 2 spare M3 roll in T-nuts, so getting additional hardware was not required for me.
Push-in rivet washers - 1.5mm thick washers that secure the push in rivets. I use them to fill in the M3 holes on the enclosure with the spare push in rivets from the kit. There are 13 holes in the enclosure top where these fit: 5 on each front corner, and 3 on the top left opposite from the LED mount. I had 15 spare rivets from my kit. I made these in Prusa Slicer so there is no step file for them.