54mm Motor/Engine Retainer for High Power Rockets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Retainer Cap and Rings for keeping your high power rocket motor in place
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 127
- Wydruki
- 4
- Wyświetlenia
- 337
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
In a previous update, there was a mixup with the cap and I posted one too big. these should all work together now. I sincerely apologize for the confusion.
I initially created these for my Wildman Punisher 3 model. Recently, I've received several requests for LOC/Precision motor mount tubes, so I modified the ring to accommodate those tubes.
The cap is interchangeable. There is some design geometry on the end, so I print these facing up, with organic supports. Be careful not to get the supports on the threads.
These were printed in PETG with great success, but ABS, ASA, etc. will work just as well. Just make sure your filament is heat-resistant. The cap is expendable but should last dozens of flights before needing a replacement based on your filament choice. YMMV.
I have confirmed that these parts fit their target counterparts and each other.
If you need a different size, let me know and I will try to make one to your specs.
Wildman 54mm MMT Ring:
ID: 57.4mm
OD: ~60.85mm
Height: 21mm
LOC/Precision 54mm MMT Ring:
ID: 58.4mm
OD: ~61.85mm
Height: 21mm
Cap:
OD: 70mm
Height: 34mm
Links:
-----------------------------------------------
If you find these models useful, please consider a small contribution.