1 / 9
My entry to de 2024 3D Printing Industry Awards - Trophy Design Competition — zdjęcie 1
1 / 9

My entry to de 2024 3D Printing Industry Awards - Trophy Design Competition

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

instructions down below

Ocena
0 / 5
Polubienia
5
Pobrania
14
Wydruki
0
Wyświetlenia
101
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Creative Commons — Attribution
  1. Ok so first put the lid to the base on the base
  2. Then put small filaments pises in the 6 holes approximately 5 mm long
  3. Then put the little feet into the small holes with melted filalment sumps make sure they are facing the right way so you can see in the pictures
  4. So take the sign with the letters put some filament on the back as you can see in the pictures then melt it and while it is still warm put the big nozzel on top
  5. and put the nozzle on top and enjoy

 

 

what if the nozzle doesn't fit on 
de top of the three humans handsmelt their feet and adjust them accordingly