Play stove for kids
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy to install, click-in-place, play stove with knobs that make a clicking sound when you turn them.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 225
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a play stove with turnable knobs that have a clicking sound (and feel) when you turn them. (See end of video)
It is designed to be easy to position and install with no visible screws.
Print instructions
All parts:
Filament: PLA
Perimeters: 3
Infill: 15% gyroid
Layer hight: 0,2 mm
Knob:
Pin needs 6 perimeters. Use af modifier or make the whole knob 6 perimeters.
I used a cylinder modifier that covers the pin, with a hight of 5 mm.
Stove:
I have left out a notch in the bottom of the stove. This is so you can test the fit without having the stove base screwed down, and still be able separate the stove and stove base by using a flat head screwdriver or similar to pry them apart.
Assembly
The pin in the knob is supported by a CAD-designed support. Remove this before assembly.
After screwing down the base, the top stove or knob simply clicks into place.
When clicking in the knob, make sure to lightly twist the knob at the same time so the pin sets in between the cog spurs.
Here is a video of me assembling it in my kids play house. Enjoy.