1 / 2
Gondola v5 - Low Profile Fan Shroud for Sovol SV08 — zdjęcie 1
1 / 2

Gondola v5 - Low Profile Fan Shroud for Sovol SV08

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Latest "Gondola"-style fan shroud for SV08 using 5020 fan - now with LEDs. Compatible with multiple hotends and probes.

Ocena
5 / 5
Polubienia
24
Pobrania
104
Wydruki
2
Wyświetlenia
1213
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Designed and tested in collaboration with @SeeingRED

BL hotend version coming once I have a chance to get it up to date with all improvements. 

Print with Voron settings: 4 walls, 5 top/bottom, 25% gyroid infill. 

Requires 4x heat set inserts M3 x 4.5mm OD x 5mm L

Use stock screws with belt retaining clips

M3x10ish for attaching body to frame

LEDs

3x WS2812b RGB LED on 10mm PCB

Connect via toolhead UART port: 5v PA10 GND. Consult Nadir's wiring guide here. 

May be helpful to grab some 4 pin JST 1.25mm connectors with wires pre-pinned. 

Arms are compatible with all main bodies. 

Config 

[neopixel hotend]
pin: extra_mcu:PA10
chain_count: 3
color_order: GRB
initial_RED: 0.3
initial_GREEN: 0.3
initial_BLUE: 0.3
#initial_white: 0.3

Use the below macro format to make the lights turn different colors. I've created one for all the different phases of START_PRINT, I'll post mine as an example below. 

[gcode_macro status_homing]
gcode: 
  SET_LED LED=hotend INDEX=1 RED=0 GREEN=0 BLUE=0.5 TRANSMIT=1
  SET_LED LED=hotend INDEX=2 RED=0 GREEN=0 BLUE=0.5 TRANSMIT=1
  SET_LED LED=hotend INDEX=3 RED=0 GREEN=0.5 BLUE=0 TRANSMIT=1

[gcode_macro status_heating] gcode: SET_LED LED=hotend RED=.5 GREEN=0 BLUE=0 TANSMIT=1

[gcode_macro status_QGL] gcode: SET_LED LED=hotend INDEX=1 RED=0 GREEN=.5 BLUE=.25 TRANSMIT=1 SET_LED LED=hotend INDEX=2 RED=0 GREEN=.5 BLUE=.25 TRANSMIT=1 SET_LED LED=hotend INDEX=3 RED=0 GREEN=.25 BLUE=.5 TRANSMIT=1

My START_PRINT macro as an example of how to use LED macros.  Note this has a Beacon-specific z-offset routine, please check and modify as needed before using. Right

[gcode_macro START_PRINT]
gcode:
    {% set BED_TEMP = params.BED_TEMP|default(60)|float %}
    {% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(210)|float %}
    STATUS_HEATING
    M140 S{BED_TEMP}
    M104 S{EXTRUDER_TEMP}
    {% if not 'xyz' in printer.toolhead.homed_axes %}
    M117 Homing...
    STATUS_HOMING
    G28
    {% endif %}
    {% if printer.quad_gantry_level.applied|lower != 'true' %}
    M117 Quad Gantry Level...
    STATUS_QGL
    QUAD_GANTRY_LEVEL
    {% endif %}
    G90 
    M117 Nozzle Wipe...
    G1 X315 Y360 Z5 F9000
    M109 S{EXTRUDER_TEMP}
    G1 Z3.5 F300
    G1 X330 F4500
    G1 Y360 X300
    G1 Y360 X330
    G1 Y360 X300
    G1 Y360 X330
    G1 Y360 X300
    G1 Y360 X330
    G1 Y360 X300
    G1 Y360 X330
    G1 Y360 X300
    G1 Y360 X330
    G1 Y356 X300
    G1 Y360 X330
    G1 Y357 X300
    G1 Y360 X300
    G1 Y357 X330
    G1 Y360 X330
    G1 Y357 X310
    G1 Y360 X310
    G1 Y357 X310
    G1 Y360 X330
    G1 Y357 X330
    G1 Y360 X330
    G1 Y357 X300
    G1 Y360 X300
    G1 Y357 X300
    G1 Y360 X330
    G1 Y357 X330
    G1 Y360 X330
    G1 Y357 X300
    G1 Y360 X300
    G1 Y357 X300
    G1 Y360 X330
    M400
    G1 X338 Y360
    G91
    G0 Z5
    G90
    G1 X338 Y330
    STATUS_MESHING
    M117 Bed Mesh...
    BED_MESH_CALIBRATE adaptive=1
    STATUS_OFFSET
    G90
    G1 E-3 F1000
    SET_GCODE_OFFSET Z=0
    G28 Z METHOD=CONTACT CALIBRATE=1
    M117 Line Purge...
    STATUS_PURGING
    LINE_PURGE
    STATUS_READY
    M117 Print Start!

 

 

Tagi