Tool storage and stacking tree high individuality
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool storage tree design for saving space on workbench and easy access by rotation of platforms.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A tool holder in tree design. A practical solution for tool storage.
30 mm main post can be printed or bought in home improvement store as a steel furniture leg. Furniture legs are available also in different lengths which is really beneficial.
M6 thread insert are used with M6 clamping levers or normal bolts to fixate the “leaves”.
V2 Parts are optimized to fit for the M6 clamping lever (example link lever)
Alternative a M6 nut and bolt can be used to fixate the leaves.
A variety of storage “leaves” for the tool store tree are available. All parts are based on tool_tree_V2_template_mount (available as STL or FreeCad file) for mounting to the post:
- tool_tree_allen_key.st
- tool_tree_bucket_20mm.stl
- tool_tree_hexagon_bit_plate_6.3mm.stl
- tool_tree_hexagon_screw_driver_SW_4mm.stl
- tool_tree_plyers.stl
- tool_tree_post_200mm.stl
- tool_tree_slider_gauge.stl
- tool_tree_solder_tips.stl
- tool_tree_square_bit_wrench.stl
- tool_tree_trill_leave.stl
- tool_tree_V2_large_bucket
- tool_tree_V2_giant_bucket
- tool_tree_V2_hole_leave
- tool_tree_V2_spanner_holder
- tool_tree_V2_drill_storage
More leaves will be added from time to time.
Also use the FreeCAD template to design your own customized leaves:
- tool_tree_base_plate_template
Steel furniture legs 30 mm diameter:
https://www.conrad.de/de/p/stahlrohrmoebelfuesse-weiss-800mm-rund-30mm-d-871249921.html
Clamping lever:
https://www.conrad.de/de/p/verstellbare-klemmhebel-kunststoff-schraube-stahl-840013318.html
Mounting instructions:
Mount the post to a flat surface with four screws. You can also add the “tool_tree_post_wall_mount.stl” to the top of the post and screw it into the wall to give the post more stability.