15x15 (Minimal Spaced) Kailh Choc Keycap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small Kailh Choc v1 compatible keycap, designed for Choc keyboards with 15x15 spacing.
- Ocena
- 4 / 5
- Polubienia
- 24
- Pobrania
- 213
- Wydruki
- 1
- Wyświetlenia
- 1151
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
What Is This?
There's a dire lack of FDM printable Kailh Choc keycaps that work on mininum spaced boards, such as the minimally spaced version of @kilipan's excellent Zilpzalp. I wanted to fill this keycap void, and also design a keycap for my keychain macropad.
3D Printing Instructions
You can print this on any FDM printer with a 0.4 (or smaller) nozzle, with the lowest layer height your printer and nozzle can go to. The settings I used are are follows:
- 0.08 layer height
- 0.44 line width (110% of nozzle)
- 100% infill
- Oriented on one of the outer edges of the keycap
- Brim and supports are enabled
Inspirations
I was heavily inspired by the "wrk." keycaps, designed and sold by WORK LOUDER. In addition, @koozie's Choc Louder keycaps showed to me that a keycap in that style can be FDM printed successfully.