1 / 3
Trumba - A Tuba mouthpiece to Trumpet converter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mouthpiece converter tested on Conn 120S helleberg and Laskey 30H, to get that low brass buzz on a trumpet.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 228
- Wydruki
- 0
- Wyświetlenia
- 872
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (27)Powiązane
After not playing my trumpet for many years, rather playing low brass I found getting that buzz quite challenging. So to procrastinate working on the buzz I made a simple converter that took my Conn 120S helleberg and fit into the trumpet. I printed this with Pla+ and can get lower octaves/higher octaves out the middle range buzzes don't work may work better with a different material.