No-hardware picatinny Sillyshell holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
A Picatinny-mounted Sillyshell holder. It's designed so you can fit multiple on the same rail with no extra space between, and with no screws required for easy accessibility. This print holds the shells perpendicular to the rail, a design I've rarely seen so far. It passes the vertical shake test with my heaviest shell, the Bottlenose, but tends to slip horizontally if I whack the blaster against my hand.
I printed these on both a Prusa Mk4 and a Bambu X1C--I found that the peg did not fit in the Prusa version and tore itself apart when I tried to force it in (Seemed to be a dynamic pressure control issue). Don't do that! Sand it down if it doesn't want to go in. The Bambu version, meanwhile, had no noticeable print issues.
Print both the peg and the holder with 4 walls and automatic grid-type snug supports. See the slicer screenshots above for reference.
Happy blasting!