1 / 6
#0188 Hard Case for Ice Hockey Figures [used for coaching] — zdjęcie 1
1 / 6

#0188 Hard Case for Ice Hockey Figures [used for coaching]

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stores the ice hockey figures I designed used to teach/coach positional play.

Ocena
0 / 5
Polubienia
3
Pobrania
13
Wydruki
0
Wyświetlenia
185
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Indoor Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

*** Thanks for checking out this model! ***

If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, effort, and CAFFEINE! ;-)

And then check out my other models for something else you might like!

**********

This hard case helps store and organize the Ice Hockey Figures I created to help kids visualize positional play on the ice. 

Key Features:

  1. Fits all 14 figures in the box - and keeps them organized.
  2. You can easily tell if one of the figures is missing.
  3. Hinged lid that latches shut.
  4. Box and Lid are printed separately and uses sections of filament to act as hinges.

Printing Recommendations:

  1. Perfect application for PLA.  PETG also recommended.
  2. 0.2mm layers, 2 vertical walls
  3. Use the .3mf files included - they include adhesion helpers on each of the corners.
  4. Use both the adhesion helpers and 2-3mm brim (due to the larger size).

Hinge assembly Instructions (do this for both hinges):

  1. Cut a piece of filament about 5mm longer than the hinge length.
  2. Using a lighter or mini torch, heat up one end then press this end against a surface like a table to form a flattened “nail head”.
  3. Insert the filament through each hinge and trim length so that only 1 or 1.5mm sticks out.
  4. Heat up a soldering iron with a flat tip.*
  5. While holding the “nail head” pressed in place, use the soldering iron* to melt the open end to form the "other nail head” to lock the filament in place.

* Alternatively:  if you don't have a soldering iron, heat up the side of an X-Acto blade (with a lighter/mini torch) and use that to press and create the "other nail head”.

**********

If you add this to your collection and/or download the model, please >click< the LIKE button and give it some STARS!

Remember, you can earn some Prusameters if you post a pic of your make!  Plus, it would make my day to see it. ;-D

Happy Printing!

P.S. Please post some constructive feedback if you'd like to see something improved.

Tagi