Airpods Pro 2 Toaster Charging Dock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little charging dock for Airpod pro 2s, it works like a little toaster
- Ocena
- 0 / 5
- Polubienia
- 72
- Pobrania
- 200
- Wydruki
- 0
- Wyświetlenia
- 1534
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Airpod charging dock, it operates like a little toaster you will need to purchase some additional parts to assemble.
May work with gen 1 Airpod pros based off of the dimensions, but I have not tested it.
Print the parts in the following orientations use at least 3 walls. Support the overhangs except for the rear charging port area and screw holes. Assemble according to the gif, the M3 Screws might be a bit hard to start since you are cutting threads in the plastic but should work if your printer is tuned correctly
BOM:
https://www.amazon.com/dp/B0D33RWK75 (Right Angle USB C)
2x M3x20 FHCS OR 2x M3x15 BHCS/SHCS