LED-Gehäuse für Xiaomi Mi 3 / LED housing for Xiaomi Mi 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
für LED Minileuchte mit Li-polymer Akku von HM Müllner/ for LED mini light with Li-polymer battery from HM Müllner
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Für die dunkle Jahreszeit ist es schöner, ein richtig helles Licht am Roller zu haben. Es bot sich an, ein Gehäuse für die vorhandene LED-Leuchte zu drucken.
Um den Gegenverkehr nicht zu blenden, kann die Leuchte geneigt werden. Das Gehäuse ist nicht wasserdicht, hat aber 2 Ablauflöcher im Boden. Der Deckel hat einen Schnappverschluss, so dass man die Leuchte sehr einfach einsetzen kann.
Front.stl wird mittels Sekundenkleber auf die Box geklebt.
Zusätzlich benötigt man
4 x Zylinderkopfschraube M3 x 12
2 x Zylinderkopfschraube M3 x 16
6 x U-Scheibe U3
6 x Gewinde M3 x 5,7
Translation: DeepL
It's nice to have a really bright light on the scooter for the dark season. It made sense to print a housing for the existing LED light.
The light can be tilted so as not to dazzle oncoming traffic. The housing is not waterproof, but has 2 drainage holes in the base. The cover has a snap lock so that the light can be inserted very easily.
Front.stl is glued to the box using superglue.
You also need
4 x cylinder head screw M3 x 12
2 x cylinder head screw M3 x 16
6 x washer U3
6 x M3 x 5.7 threads