TILTED 5015 COOLING FAN FOR ARTILLERY X1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simpler cooling fan solution to direct the air flow in full strength from the fan to the printing part
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Instead of weird fanducts to redirect the air flow from the cooling fan to the part, simply tilt the fan to point directly to the part. 3 easy-to-print parts, one base bracket where the factory cooling fan usually sits, a body piece to enclose the 5015 fan, and a nozzle piece to narrow the airflow. The BODY fits in the NOZZLE part, no need for glue or anything, and use an M3 bolt/nut to join them to the BASE bracket. Then simply adjust the tilt as needed, and secure it by tightening the bolt
Print at least the BASE and NOZZLE parts in PETG. The BODY part can be PLA
BTW, this is a modification of a model by Canal 3D Capital @canal3dcapital534 in Youtube. He made it for the stock 4020. It can't be found here in printables or any other site afaik, but credit goes where credit is due