Copymaster Cardboard Spool Centre TechnologyOutlet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TechnologyOutlet supply CopyMaster filament on cardboard spools with hollow centres & they dont rest on bearing holders
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you find my designs useful, please consider sending a tip
TechnologyOutlet now supply CopyMaster filament on cardboard spools, which have hollow centres. This means, for those of us with bearing-based filament holders, there's nothing inside the spool to rest on the bearings. The filament is always under tension and being pulled off the roll rather than unwound.
This simple insert means your CopyMaster spools will rotate freely again without tension on the filament.
UPDATE: Added a 84mm version as I found sometimes the spool can work its way off the end of the tube as there's only a few mm sticking out.
(I am not affiliated with TechnologyOutlet or CopyMaster, I just use their PLA regularly)
Print Settings: Quality: 0.2 Infill: 20% Brim: Yes (Personal Preference) Supports: No Material: PLA
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
No
Supports:
No
0.2
Infill:
20%
Notes:
Print Settings:
Quality: 0.2
Infill: 20%
Brim: Yes (Personal Preference)
Supports: No
Material: PLA
Category: 3D Printer Accessories