Rear Strut Mount Shock Corrosion Protector - road salt Ford Volvo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rear Strut Mount Shock Corrosion Protector - salt protection for Ford / Volvo
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you find my designs useful, please consider sending a tip
Remix of Drip Hose Funnel by mediaman
Was getting sick of rear shock mounts on my 2008 Ford C-Max and 2010 Volvo S40 only lasting 2 or 3 years before the mounting lugs snapping, due to corrosion from road salt in winter.
When wet road salt or water, flicked off from the tyres, hits dried encrusted salt on the top mounts, it creates an electrolyte causing the metals of the car body and the top mount to chemically react.
Simple 2 part cover to act as a splash guard and add some protection.
2 slightly different sides included, inside part has a curved top edge in case the bodywork of the wheel arch interferes with pushing the cover right over the strut top mount.
Supports needed for cable tie loops and cylindrical part.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
No
Supports:
Yes
0.2
Infill:
100
Notes:
Print Settings:
Quality: 0.2
Infill: 100%
Brim: Yes (Personal Preference)
Supports: Yes
Material: PLA
Category: Automotive