Folding Picnic Table Locking Clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Folding Picnic Table Locking Clips
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you find my designs useful, please consider sending a tip
The original clips on my folding picnic table snapped, so I designed replacements. I don't know the exact make/model of the table, it is the same as the last 2 images.
The originals had a rounded peg that tended to push the legs of the opposing clip apart slightly whenever you locked it, which probably contributed to their eventual breaking, so my design uses a flush fit that slides between the pegs rather than forces its way through.
A full replacement set requires: 2x Folding Picnic Table Latch 1 2x Folding Picnic Table Latch 2 4x 2mm Folding Picnic Table Clip
Slice in the orientation shown in the Cura image for maximum strength of the parts
Print Settings: Quality: 0.2 Infill: 100% (makes them really strong and barely adds any time) Brim: Yes (Personal Preference) Supports: Yes Material: PLA
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
Yes
200
Infill:
100
Notes:
Print Settings:
Quality: 0.2
Infill: 100% (makes them really strong and barely adds any time)
Brim: Yes (Personal Preference)
Supports: Yes
Material: PLA
Category: Outdoor & Garden