1 / 11
Sewage Inspection Chamber channel blocker aka Shit Stopper 2000 — zdjęcie 1
1 / 11

Sewage Inspection Chamber channel blocker aka Shit Stopper 2000

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An unused channel blocker for a sewage inspection chamber

Ocena
0 / 5
Polubienia
0
Pobrania
9
Wydruki
0
Wyświetlenia
100
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

If you find my designs useful, please consider sending a tip

An unused channel blocker for a sewage inspection chamber to stop unwanted "solid waste" getting stuck in the unused adjacent trough, when the water shoots out of the opposite pipe. AKA The Sh*t Stopper 2000.

3 versions, 2 variants for each 1: Straight & Straight With Holes 2: 45° left & 45° left with Holes 3: 45° right & 45° right with Holes

Half-pipe diameter is approx 100mm and the rectangular plate is about 180mm for blocking the channel. These seem to be standard sizes for inspection chambers in the UK, so your mileage may vary if located elsewhere

Held in place with waterproof / gutter sealant to stop any chance of it moving and blocking the pipe, but this also makes it permanently fixed in place, allowing easy removal.

I added the holes variants as water can still accumulate in the channel from splashing and this will let it drain.

Print Settings: Quality: 0.2 Infill: 10% Brim: Yes (Personal Preference) Supports: No Material: PLA

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

**Rafts:**

No

Supports:

No

**Resolution:**

0.2

Infill:

10

**Filament:** Technology Outlet PLA Black

Notes:

Print Settings:
Quality: 0.2
Infill: 10%
Brim: Yes (Personal Preference)
Supports: No
Material: PLA

Category: Household

Tagi