1 / 2
Little Friends Landmark Animal Cage Replacement Hamster Wheel Spindle — zdjęcie 1
1 / 2

Little Friends Landmark Animal Cage Replacement Hamster Wheel Spindle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modified to fit the Little Friends Landmark Animal Cage bars spacing and wheel spindle length/thickness.After printing…

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
81
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Modified to fit the Little Friends Landmark Animal Cage bars spacing and wheel spindle length/thickness.

After printing my own, I recommend printing on its side and using supports, the STL loads in this orientation by default. This will print the spindle with the filament strands running along the entire length of the spindle, so the sheering force will then be distributed along the entire 30mm spindle.

Printing it with the spindle pointing upwards, means the sheering force is concentrated on an area only 4mm wide and will break easily when the spindle tip is compressed to fit the wheel onto the spindle.

I wasted my filament, so you don't have to!

Pro tip: Add a drop of sunflower or olive oil to the spindle before fitting, and it will spin silently and be safe for the Hamster.

Print Settings: Quality: 0.2 Infill: 40-60% Brim: Yes (Personal Preference) Supports: No Material: PLA

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

**Rafts:**

No

Supports:

No

**Resolution:**

0.2

Infill:

40-60%

**Filament:** Technology Outlet PLA Any

Notes:

Print Settings:
Quality: 0.2
Infill: 40-60%
Brim: Yes (Personal Preference)
Supports: No
Material: PLA

Category: Pets

Tagi