1 / 8
Boite à stylo magnétique - Magnetic pen box — zdjęcie 1
1 / 8

Boite à stylo magnétique - Magnetic pen box

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Un écrin à fermeture magnétique pour vos stylos A magnetically closed case for your pens

Ocena
0 / 5
Polubienia
4
Pobrania
22
Wydruki
0
Wyświetlenia
170
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution

Une pause dans le Gcode permet d'inserer les aimants de 3mm de diamètre par 2 de haut.

Attention à bien respecter le sens du magnétisme car sinon les aimants se repousseront et la boite ne fermera pas. 

Pour ce faire :

Imprimez un coté

Imprimez ensuite l'autre coté. Au moment d'inserer les aimants, placez lez sur la partie déjà imprimée. Marquez le coté apparent avec un feutre. Prenez l'aimant avec un outil fin et positionnez le dans le trou. Vous ne devez pas voir la marque que vous venez de faire. (voir les photos)

-------------------------------------------------------------------------------------------------------------

A pause in the Gcode allows the magnets to be inserted (3mm diameter by 2mm high). 

Be careful to respect the meaning of the magnetism because otherwise the magnets will repel each other and the box will not close. 

To do this : 

Print one side 

Then print the other side. When inserting the magnets, place them on the part already printed. Mark the visible side with a marker. Take the magnet with a thin tool and position it in the hole. You must not see the mark you just made. (see photos)

Tagi