1 / 3
2024 Toyota Tacoma Lower Control Arm Plugs
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plugs for the LCAs to reduce dirt trapping and wind noise. Print in TPU for a tight durable fit.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 131
- Wydruki
- 1
- Wyświetlenia
- 1267
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 9)Remiksy (0)Kolekcje (33)Powiązane
I printed them in TPU without supports. The fit is very tight by design. I pressed each plug partially into place and then whacked it with a mallet to seat it fully.
3 sizes. I'm leaving the two lower holes open for now for drainage and venting.
With that plan, each LCA gets:
4x LCA Plug 19
1x LCA Plug 14
2x LCA Plug 11