Stormlight Coin holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Coin Holder for the Stormlight Archive Heralds.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 306
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
Life Before Death
Strength Before Weakness
Journey Before Pancakes
This is the coin display for the Herald coins from the series Stormlight Archives created by DragonSteel.
Printing notes:
Easy to print. No supports needed providing your printer can handle minor bridging.
IMPORTANT- Make sure your print seam is not located inside a coin hole otherwise the coin will not fit properly. I wouldn't scatter the print seam either. Be sure the print seam is placed outside any coin hole.
Disclaimer: The tolerances were adjusted for my printer (MK4) and PLA filament to easily place the coins in and pop out. It is a narrow tolerance window that is impossible for me to tailor for every printer. All that is to say the coins may or may not fit your printer perfectly. Micro-adjustments on scaling may need to be made on your end.