Polygons low-poly wall poster

This model is based on Polynx papercraft artwork. I wanted to create a 3d model based on their papercarft artwork and turned out to be really good. This model was made from scratch. The element itself was made in Blender due to its polygons nature.

The frame size is 170x170mm, suitable for A1 mini. I advise you to scale it for a better design. The tolerance is about 0.1mm between the cubes and the frame. The frame has a wall mount that could be printed, and needs M4 5mm screws to mount onto the polygons. 

The result that I had is UGLY because I used acrylic colors (i don't have the other colors / no AMS either). I advise you to use light colored filament. 

This looks the best in the represented colors, and would be suitable to place in light-exposed rooms. I hope you share your result with me, because mine wasn't the best looking :D

Notes:

• PAY ATTENTION to the orientation of the polygons and top plate! 
• You could either use glue or M4 screws to stabilize the cubes. 

Print suggestions:

• Infill: 10%
• Support: None.
• Pattern: Gyroid (otherwise, it's gonna have a weak structure)
• Nozzle head: 0.4 is optimal.
• You need 8x cube, 8x cube inverted.

How-to:

1. Print the models.
2. Wait until it cools down.
3. Gently remove it!

Available formats:

• Print profile
• STL exported models
• Original design in Fusion360 environment

Remixes, Editing and publishing:

• You're allowed to download, print and modify the exported models based on your needs.
• You're allowed to modify the original design and implement your own modifications.
• You're allowed to publish the new modifications in the form of a remix or a new model.

I support the open sourcing of original designs and encourage the contribution in such way. Please do credit me when using the design for your base, or remixing when not referencing this model.