Gilbert Engineering Fuzion Mount v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
EMT Mount for the Gilbert Engineering Fuzion. This is a second version of the Fuzion mount that I have created. It use
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
EMT Mount for the Gilbert Engineering Fuzion.
This is a second version of the Fuzion mount that I have created. It uses the traditional + center mount vs the H design of the other mount.
Perimeters are your friend for strength in mounts. I use 4-5 perimeters and top/bottom layers at minimum.
To attach the center support to the outer supports in the center, use a 1/2" PVC Cross T with the EMT bushings you can print in my other designs. I use self tapping screws to drill through the PVC to remove any movement.