LowRider 4 case for Duet 2 wifi
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for a Duet 2 Wifi board specific to the LowRider v4 CNC, but can be used for other machines.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 391
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sorry, I did not reorient the STL files, orient to print with the flat edges down.
This box will hold a Duet 2 Wifi board. An alternate for external antenna is also included, which shortens the opening for the card antenna and adds an 8mm opening for the external antenna.
This box is specifically for the LowRider v4 CNC machine, though could probably be used for other cases. The lid shape conforms to the LowRider 4 CNC braces, and is intended to attach to them via 2 M5 screws and nuts.
The enclosure fits a 5015 style fan oiented to point downwards. This should blow cooling air under the drivers of the Duet board. This is the heat sink surface, under the TMC2209 drivers, and the most critical cooling.
I printed with 0.2mm layers and a 0.4mm nozzle in PLA, but material isn't important.