Square Quick-Connect Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modular mount for the Square Contactless Chip Reader. This allows you to easily move the reader to different…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 354
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This is a modular mount for the Square Contactless Chip Reader. This allows you to easily move the reader to different locations, it is based off of the current Square system that they sell. You can put this anywhere like on the back of a spare IPhone case and easily make the reader removable. This uses super glue to hold the two pieces together and 19mm thick double sided sticky tape to hold the reader to the unit.
Demo: https://youtu.be/kN-HlxK0B3g
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
No
Supports:
No
.20
Infill:
20%
Notes:
It is Important to print this at .20 layer height or else the tolerances will not be correct. If you don't then you will need to do some post processing for proper operation.
Category: Gadgets