Volvo V70 S60 S80 850 Wheel Center Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a hub cap or center cap for a 1998 Volvo V70 and similar models. Works great when printed in PETG.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 232
- Wydruki
- 1
- Wyświetlenia
- 961
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This center cap was designed to fit a 1998 Volvo v70, but it may also work for other models close in age, such as the 850, S60 and S80 models.
The tabs have a tendency to break off because of the layer lines, but I've had pretty good luck printing in PETG instead of PLA. The shown print is in PETG glow-in-the-dark as the main body, with black PETG for the text and half circles.
This model was intended to be printed in a multi-filament-capable 3D printer, such as the Bambu Carbon X1. I've had the best luck painting the top with the layers option, though the paint bucket can work as well. Print right side up and use support, and simply pull the supports out with plyers.
I tried uploading the print file, but Printables wouldn't allow it.